GarageFit Vehicle garage fit guide

Will a 2025 Toyota Camry fit in a standard garage?

For the u.s.-market model, the published vehicle dimensions are 193.5 in long, 72.4 in wide without mirrors, and 56.9 in high.

SHORT ANSWER

The body fits this example—but measure the mirrors.

This estimate uses an 8-foot-wide, 7-foot-high door and a 12-by-20-foot interior. A physical fit does not guarantee enough room to open doors, walk around the vehicle or avoid garage hardware.

Enter your garage →

2025 Toyota Camry dimensions

Length193.5 in
Body width, excluding mirrors72.4 in
Width with mirrors extendedNot officially published
Height56.9 in
ConfigurationU.S.-market model

Source: Toyota — 2025 Camry Features
Last checked: July 30, 2026

Fit in a 12-by-20-foot garage with an 8-foot door

Door clearance, body only11.8 in each side
Interior side clearance35.8 in each side
Combined front and rear clearance46.5 in
Clearance below a 7-foot opening27.1 in

The manufacturer source does not publish extended-mirror width for this configuration. The door result above uses body width only and is not a complete entry-clearance result. Measure across the mirrors, or confirm they can safely fold before entering.

What should you measure before parking?

Measure the narrowest usable door opening—not just the nominal door size. Check weather seals, tracks, handles, storage, wall posts and anything that reduces the clear opening. Then measure the actual vehicle at its widest and tallest points. Roof rails, antennas, tires, suspension and trim can change the number.

GarageFit is a screening calculator, not a parking guarantee. Use the exact measurements of your own vehicle and garage before attempting a tight fit.